XYH-C01A(ANSI:FR-4.1)
無鹵 0 TG150  環氧玻纖布 覆銅箔 基層壓板
特 點
■不含鹵素、銻、紅磷等成分,廢棄燃燒時不產生劇毒其他和殘留有毒成份
■無鉛兼容、阻燃達 UL 94-V0 級
■UV Blocking/AOI 兼容、高 CTI，CTI≥600V、高可靠性、高尺寸穩定性
Features
■Does not contain halogen, antimony, red phosphorus and other ingredients, waste combustion does not
produce toxic and other residual toxic ingredients
■Lead-free compatible, flame retardant up to UL 94-V0

■UV Blocking/AOI compatibility, high CTI, CTI ≥600V, high reliability, high dimensional stability

一般性能 General Properties

Remarks 備注：
Typical Values For Reference only，Specimen Thickness：1.5mm 1/1
典型值只作參考，樣品厚度：1.5mm 1/1
A=Keep the specimen originally without any process 保持原樣，不作處理
C=Temperature and humidity conditioning 在恒溫恒濕的空氣中處理
D=Immersing in distilled water with temperature control 浸在恒溫的水中處理
E=Temperature conditioning 在恒溫的空氣中處理

應用領域 Applications
■消費電子、智能手機等      ■Consumer Electronics, smartphones, etc
采購信息                            Purchasing Information

備注
1)可根據客戶要求提供其它尺寸和厚度；
2)以上圖表僅供參考；
3)版本更新恕不另行通知。
Note
1)Other sheet size and thickness could be available upon request.
2)Speciality chart for reference only.
3)Version updates without notice.

基板存放與儲存
■基板平放在干燥環境中.
■內層芯板棕化或黑化處理后如果在 24 小時內未進行壓合需在 100-120℃條件下最小烘烤 1 小時才能進入下工序. 
Laminate Handling and Storage
■Laminate should be stored in a dry environment and always stored flat.
■Inner layers should be baked for at least 1 hour 100-120℃,if inner layers are not used within 24 hours after black or
brown oxides treatment.